İyinet'e Hoşgeldiniz!

Türkiye'nin En Eski Webmaster Forum'una Hemen Kayıt Olun!

Kayıt Ol!

tuning-primer.sh mysql tuning scripti - mysql performans raporu

scorpi

0
İyinet Üyesi
Katılım
11 Ocak 2008
Mesajlar
32
Reaction score
0
adszcr3.jpg


başınızı çok agırtıyorum ama bu işaretledigim yedeki değer 8 gün için normal mi acaba, bunu artması bi sorun oluşturur mu.
 

ceyhun81

0
İyinet Üyesi
Katılım
16 Ocak 2008
Mesajlar
42
Reaction score
0
gönderdiğim bilgilerde tablolarla ilgili birçok şey yer alıyor. Yazılım ile ilgili bir sıkıntı yok çünkü diğer sunucularda da aynı yazılım çalışıyor ama bu makine kasılıyor.

gönderdiğim bilgileri bi gözden geçirip önerinizi alabilirsem mutlu olurum.. xcache kuramıyorum çünkü zend optmizer 3.3 kullanıyorum.. bunun dışında eacceloator gibi bi uygulamadan bahsediliyor falkat veriminden yada dezavantajından kimse bahsetmemiş..
 

iyinet

Root
Admin
Hosting Firması
Katılım
2 Eylül 2002
Mesajlar
5,028
Reaction score
66
Konum
Sakarya
gönderdiğim bilgilerde tablolarla ilgili birçok şey yer alıyor. Yazılım ile ilgili bir sıkıntı yok çünkü diğer sunucularda da aynı yazılım çalışıyor ama bu makine kasılıyor.

gönderdiğim bilgileri bi gözden geçirip önerinizi alabilirsem mutlu olurum.. xcache kuramıyorum çünkü zend optmizer 3.3 kullanıyorum.. bunun dışında eacceloator gibi bi uygulamadan bahsediliyor falkat veriminden yada dezavantajından kimse bahsetmemiş..

eAccelerator Xcache kadar iyidir mutlaka kurmalısınız.
Yeni makine olduğu için sanırım kapatılması gereken bazı şeyler açık durumda.
Makinaya erişim verirsen girip bakabilirim.
 

Shdwt

0
İyinet Üyesi
Katılım
25 Ocak 2008
Mesajlar
20
Reaction score
0
Aşağıdaki değerler için en uygun yapılandırma nasıl olur acaba.

PHP:
[root@server ~]# ./tuning-primer.sh

        -- MYSQL PERFORMANCE TUNING PRIMER --
             - By: Matthew Montgomery -

MySQL Version 4.1.22-standard i686

Uptime = 0 days 4 hrs 32 min 9 sec
Avg. qps = 22
Total Questions = 369627
Threads Connected = 7

Warning: Server has not been running for at least 48hrs.
It may not be safe to use these recommendations

To find out more information on how each of these
runtime variables effects performance visit:
http://dev.mysql.com/doc/refman/4.1/en/server-system-variables.html
Visit http://www.mysql.com/products/enterprise/advisors.html
for info about MySQL's Enterprise Monitoring and Advisory Service

SLOW QUERIES
Current long_query_time = 10 sec.
You have 3 out of 369639 that take longer than 10 sec. to complete
The slow query log is NOT enabled.
Your long_query_time may be too high, I typically set this under 5 sec.

WORKER THREADS
Current thread_cache_size = 384
Current threads_cached = 21
Current threads_per_sec = 0
Historic threads_per_sec = 0
Your thread_cache_size is fine

MAX CONNECTIONS
Current max_connections = 500
Current threads_connected = 8
Historic max_used_connections = 25
The number of used connections is 5% of the configured maximum.
You are using less than 10% of your configured max_connections.
Lowering max_connections could help to avoid an over-allocation of memory
See "MEMORY USAGE" section to make sure you are not over-allocating

MEMORY USAGE
Max Memory Ever Allocated : 264 M
Configured Max Per-thread Buffers : 2 G
Configured Max Global Buffers : 154 M
Configured Max Memory Limit : 2 G
Physical Memory : 3.95 G
Max memory limit seem to be within acceptable norms

KEY BUFFER
Current MyISAM index space = 825 M
Current key_buffer_size = 16 M
Key cache miss rate is 1 : 275
Key buffer fill ratio = 100.00 %
You could increase key_buffer_size
It is safe to raise this up to 1/4 of total system memory;
assuming this is a dedicated database server.

QUERY CACHE
Query cache is enabled
Current query_cache_size = 128 M
Current query_cache_used = 36 M
Current query_cache_limit = 1 M
Current Query cache Memory fill ratio = 28.47 %
Current query_cache_min_res_unit = 4 K
Query Cache is 16 % fragmented
Run "FLUSH QUERY CACHE" periodically to defragment the query cache memory
If you have many small queries lower 'query_cache_min_res_unit' to reduce fragmentation.
MySQL won't cache query results that are larger than query_cache_limit in size

SORT OPERATIONS
Current sort_buffer_size = 2 M
Current record/read_rnd_buffer_size = 256 K
Sort buffer seems to be fine

JOINS
Current join_buffer_size = 1.00 M
You have had 9 queries where a join could not use an index properly
You should enable "log-queries-not-using-indexes"
Then look for non indexed joins in the slow query log.
If you are unable to optimize your queries you may want to increase your
join_buffer_size to accommodate larger joins in one pass.

Note! This script will still suggest raising the join_buffer_size when
ANY joins not using indexes are found.

OPEN FILES LIMIT
Current open_files_limit = 4110 files
The open_files_limit should typically be set to at least 2x-3x
that of table_cache if you have heavy MyISAM usage.
Your open_files_limit value seems to be fine

TABLE CACHE
Current table_cache value = 1800 tables
You have a total of 338 tables
You have 396 open tables.
The table_cache value seems to be fine

TEMP TABLES
Current max_heap_table_size = 16 M
Current tmp_table_size = 64 M
Of 13933 temp tables, 3% were created on disk
Effective in-memory tmp_table_size is limited to max_heap_table_size.
Created disk tmp tables ratio seems fine

TABLE SCANS
Current read_buffer_size = 1020 K
Current table scan ratio = 1417 : 1
read_buffer_size seems to be fine

TABLE LOCKING
Current Lock Wait ratio = 1 : 176
You may benefit from selective use of InnoDB.
If you have long running SELECT's against MyISAM tables and perform
frequent updates consider setting 'low_priority_updates=1'
 

Shdwt

0
İyinet Üyesi
Katılım
25 Ocak 2008
Mesajlar
20
Reaction score
0
Daha 4 saattir açık mysql. En az 48 saat açık kalması gerek önerilerin sağlıklı olması için.

Aslında 1 aylık bir süreden sonra ilk defa restart attım. Atmadan önce almış olsaydım daha iyi olacaktı. 2 gün sonra tekrardan verileri gönderirim.

Teşekkürler.
 

Mack

0
İyinet Üyesi
Onaylı Üye
Katılım
17 Eylül 2005
Mesajlar
302
Reaction score
0
Konum
AntaLya
şuan uyguladım ve bir çıktı verdi ama 4 gün sonraki çıktı daha sağlıklı olacak herhalde?
 

heaven

0
İyinet Üyesi
Katılım
19 Şubat 2006
Mesajlar
421
Reaction score
0
Tuning-primer 'i En Sakin Zamanda Çalıştırmam doğrumu bilmiyorum ama bende bi ayar almak istiyorum..

Forum sitesi ve yogun zamanlarda Mysql ciddi anlamda kasıyor..

Processor #1 Vendor: GenuineIntel
Processor #1 Name: Intel(R) Pentium(R) 4 CPU 3.60GHz
Processor #1 speed: 3590.203 MHz
Processor #1 cache size: 2048 KB

Processor #2 Vendor: GenuineIntel
Processor #2 Name: Intel(R) Pentium(R) 4 CPU 3.60GHz
Processor #2 speed: 3590.203 MHz
Processor #2 cache size: 2048 KB


Memory:
2065284k/2088764k available (1883k kernel code, 22608k reserved, 761k data, 188k init, 1171260k highmem)


-- MYSQL PERFORMANCE TUNING PRIMER --
- By: Matthew Montgomery -

MySQL Version 4.1.22-standard i686

Uptime = 2 days 9 hrs 21 min 5 sec
Avg. qps = 22
Total Questions = 4554691
Threads Connected = 2

Server has been running for over 48hrs.
It should be safe to follow these recommendations

To find out more information on how each of these
runtime variables effects performance visit:
http://dev.mysql.com/doc/refman/4.1/en/server-system-variables.html
Visit http://www.mysql.com/products/enterprise/advisors.html
for info about MySQL's Enterprise Monitoring and Advisory Service

SLOW QUERIES
Current long_query_time = 10 sec.
You have 1076 out of 4554703 that take longer than 10 sec. to complete
The slow query log is NOT enabled.
Your long_query_time may be too high, I typically set this under 5 sec.

WORKER THREADS
Current thread_cache_size = 128
Current threads_cached = 76
Current threads_per_sec = 0
Historic threads_per_sec = 0
Your thread_cache_size is fine

MAX CONNECTIONS
Current max_connections = 300
Current threads_connected = 2
Historic max_used_connections = 78
The number of used connections is 26% of the configured maximum.
Your max_connections variable seems to be fine.

MEMORY USAGE
Max Memory Ever Allocated : 507 M
Configured Max Per-thread Buffers : 806 M
Configured Max Global Buffers : 298 M
Configured Max Memory Limit : 1 G
Physical Memory : 1.97 G
Max memory limit seem to be within acceptable norms

KEY BUFFER
Current MyISAM index space = 569 M
Current key_buffer_size = 256 M
Key cache miss rate is 1 : 58894
Key buffer fill ratio = 60.00 %
Your key_buffer_size seems to be too high.
Perhaps you can use these resources elsewhere

QUERY CACHE
Query cache is enabled
Current query_cache_size = 32 M
Current query_cache_used = 17 M
Current query_cache_limit = 4 M
Current Query cache Memory fill ratio = 54.40 %
Current query_cache_min_res_unit = 4 K
Query Cache is 16 % fragmented
Run "FLUSH QUERY CACHE" periodically to defragment the query cache memory
If you have many small queries lower 'query_cache_min_res_unit' to reduce fragmentation.
MySQL won't cache query results that are larger than query_cache_limit in size

SORT OPERATIONS
Current sort_buffer_size = 2 M
Current record/read_rnd_buffer_size = 256 K
Sort buffer seems to be fine

JOINS
Current join_buffer_size = 132.00 K
You have had 84 queries where a join could not use an index properly
You should enable "log-queries-not-using-indexes"
Then look for non indexed joins in the slow query log.
If you are unable to optimize your queries you may want to increase your
join_buffer_size to accommodate larger joins in one pass.

Note! This script will still suggest raising the join_buffer_size when
ANY joins not using indexes are found.

OPEN FILES LIMIT
Current open_files_limit = 10310 files
The open_files_limit should typically be set to at least 2x-3x
that of table_cache if you have heavy MyISAM usage.
Your open_files_limit value seems to be fine

TABLE CACHE
Current table_cache value = 5000 tables
You have a total of 2092 tables
You have 2237 open tables.
The table_cache value seems to be fine

TEMP TABLES
Current max_heap_table_size = 16 M
Current tmp_table_size = 32 M
Of 36001 temp tables, 0% were created on disk
Effective in-memory tmp_table_size is limited to max_heap_table_size.
Created disk tmp tables ratio seems fine

TABLE SCANS
Current read_buffer_size = 128 K
Current table scan ratio = 2270 : 1
read_buffer_size seems to be fine

TABLE LOCKING
Current Lock Wait ratio = 1 : 1171
You may benefit from selective use of InnoDB.
 

heaven

0
İyinet Üyesi
Katılım
19 Şubat 2006
Mesajlar
421
Reaction score
0
my.cnf dosyasını da ekleyiniz

tabi buyrun;

Kod:
[mysqld]
skip-locking
safe-show-database
skip-name-resolve
max_connections = 300
thread_cache_size = 128
key_buffer = 256M
query_cache_type = 1
query_cache_size = 32M
query_cache_limit = 4M
table_cache = 5000
low_priority_updates = 1
 

Shdwt

0
İyinet Üyesi
Katılım
25 Ocak 2008
Mesajlar
20
Reaction score
0
PHP:
-- MYSQL PERFORMANCE TUNING PRIMER --
             - By: Matthew Montgomery -

MySQL Version 4.1.22-standard i686

Uptime = 3 days 5 hrs 14 min 38 sec
Avg. qps = 23
Total Questions = 6419996
Threads Connected = 6

Server has been running for over 48hrs.
It should be safe to follow these recommendations

To find out more information on how each of these
runtime variables effects performance visit:
http://dev.mysql.com/doc/refman/4.1/en/server-system-variables.html
Visit http://www.mysql.com/products/enterprise/advisors.html
for info about MySQL's Enterprise Monitoring and Advisory Service

SLOW QUERIES
Current long_query_time = 10 sec.
You have 17 out of 6420012 that take longer than 10 sec. to complete
The slow query log is NOT enabled.
Your long_query_time may be too high, I typically set this under 5 sec.

WORKER THREADS
Current thread_cache_size = 384
Current threads_cached = 64
Current threads_per_sec = 0
Historic threads_per_sec = 0
Your thread_cache_size is fine

MAX CONNECTIONS
Current max_connections = 500
Current threads_connected = 8
Historic max_used_connections = 72
The number of used connections is 14% of the configured maximum.
Your max_connections variable seems to be fine.

MEMORY USAGE
Max Memory Ever Allocated : 472 M
Configured Max Per-thread Buffers : 2 G
Configured Max Global Buffers : 154 M
Configured Max Memory Limit : 2 G
Physical Memory : 3.95 G
Max memory limit seem to be within acceptable norms

KEY BUFFER
Current MyISAM index space = 830 M
Current key_buffer_size = 16 M
Key cache miss rate is 1 : 531
Key buffer fill ratio = 100.00 %
You could increase key_buffer_size
It is safe to raise this up to 1/4 of total system memory;
assuming this is a dedicated database server.

QUERY CACHE
Query cache is enabled
Current query_cache_size = 128 M
Current query_cache_used = 47 M
Current query_cache_limit = 1 M
Current Query cache Memory fill ratio = 36.89 %
Current query_cache_min_res_unit = 4 K
Query Cache is 23 % fragmented
Run "FLUSH QUERY CACHE" periodically to defragment the query cache memory
If you have many small queries lower 'query_cache_min_res_unit' to reduce fragmentation.
MySQL won't cache query results that are larger than query_cache_limit in size

SORT OPERATIONS
Current sort_buffer_size = 2 M
Current record/read_rnd_buffer_size = 256 K
Sort buffer seems to be fine

JOINS
Current join_buffer_size = 1.00 M
You have had 87 queries where a join could not use an index properly
You should enable "log-queries-not-using-indexes"
Then look for non indexed joins in the slow query log.
If you are unable to optimize your queries you may want to increase your
join_buffer_size to accommodate larger joins in one pass.

Note! This script will still suggest raising the join_buffer_size when
ANY joins not using indexes are found.

OPEN FILES LIMIT
Current open_files_limit = 4110 files
The open_files_limit should typically be set to at least 2x-3x
that of table_cache if you have heavy MyISAM usage.
Your open_files_limit value seems to be fine

TABLE CACHE
Current table_cache value = 1800 tables
You have a total of 337 tables
You have 520 open tables.
The table_cache value seems to be fine

TEMP TABLES
Current max_heap_table_size = 16 M
Current tmp_table_size = 64 M
Of 215864 temp tables, 3% were created on disk
Effective in-memory tmp_table_size is limited to max_heap_table_size.
Created disk tmp tables ratio seems fine

TABLE SCANS
Current read_buffer_size = 1020 K
Current table scan ratio = 1499 : 1
read_buffer_size seems to be fine

TABLE LOCKING
Current Lock Wait ratio = 1 : 101
You may benefit from selective use of InnoDB.
If you have long running SELECT's against MyISAM tables and perform
frequent updates consider setting 'low_priority_updates=1'

PHP:
[mysqld]
old-passwords = 1
safe-show-database
max_connections = 500
key_buffer = 16M
myisam_sort_buffer_size = 64M
join_buffer_size = 1M
read_buffer_size = 1M
sort_buffer_size = 2M
table_cache = 1800
thread_cache_size = 384
wait_timeout = 180
connect_timeout = 10
tmp_table_size = 64M
max_allowed_packet = 64M
max_connect_errors = 10
query_cache_limit = 1M
query_cache_size = 128M
query_cache_type = 1
query_prealloc_size = 16384
query_alloc_block_size = 16384
[mysqld_safe]
open_files_limit = 8192
[mysqldump]
quick
max_allowed_packet = 16M
[myisamchk]
key_buffer = 64M
sort_buffer = 64M
read_buffer = 16M
write_buffer = 16M


PHP:
Server Özellikleri
Dual Xeon 3.0D GHz
4 GB RAM
PHP 5.2.5
Apache v1.3.39
MySQL Sürümü  	4.1.22-standard

Sanırım uptime vakti doldu. Bu değerlere uygun bir yapılandırma yazarsanız sevinirim. Load 4 - 6 arası dolanıyor. xcache kurmak istiyorum ama serverda zend var. Zendi kaldırıp xcache kurunca mesaj gönderiminde hata oluşuyor. Boş bir sayfa çıkıyor karşıma. Error yada bekleme yok. Bu yüzden Loadı düşüremedim.
 

iyinet

Root
Admin
Hosting Firması
Katılım
2 Eylül 2002
Mesajlar
5,028
Reaction score
66
Konum
Sakarya
tabi buyrun;

Kod:
[mysqld]
skip-locking
safe-show-database
skip-name-resolve
max_connections = 300
thread_cache_size = 128
key_buffer = 256M
query_cache_type = 1
query_cache_size = 32M
query_cache_limit = 4M
table_cache = 5000
low_priority_updates = 1

Ayarlar gayet güzel, olduğu gibi bırakın.
 

iyinet

Root
Admin
Hosting Firması
Katılım
2 Eylül 2002
Mesajlar
5,028
Reaction score
66
Konum
Sakarya
PHP:
-- MYSQL PERFORMANCE TUNING PRIMER --
             - By: Matthew Montgomery -

MySQL Version 4.1.22-standard i686

Uptime = 3 days 5 hrs 14 min 38 sec
Avg. qps = 23
Total Questions = 6419996
Threads Connected = 6

Server has been running for over 48hrs.
It should be safe to follow these recommendations

To find out more information on how each of these
runtime variables effects performance visit:
http://dev.mysql.com/doc/refman/4.1/en/server-system-variables.html
Visit http://www.mysql.com/products/enterprise/advisors.html
for info about MySQL's Enterprise Monitoring and Advisory Service

SLOW QUERIES
Current long_query_time = 10 sec.
You have 17 out of 6420012 that take longer than 10 sec. to complete
The slow query log is NOT enabled.
Your long_query_time may be too high, I typically set this under 5 sec.

WORKER THREADS
Current thread_cache_size = 384
Current threads_cached = 64
Current threads_per_sec = 0
Historic threads_per_sec = 0
Your thread_cache_size is fine

MAX CONNECTIONS
Current max_connections = 500
Current threads_connected = 8
Historic max_used_connections = 72
The number of used connections is 14% of the configured maximum.
Your max_connections variable seems to be fine.

MEMORY USAGE
Max Memory Ever Allocated : 472 M
Configured Max Per-thread Buffers : 2 G
Configured Max Global Buffers : 154 M
Configured Max Memory Limit : 2 G
Physical Memory : 3.95 G
Max memory limit seem to be within acceptable norms

KEY BUFFER
Current MyISAM index space = 830 M
Current key_buffer_size = 16 M
Key cache miss rate is 1 : 531
Key buffer fill ratio = 100.00 %
You could increase key_buffer_size
It is safe to raise this up to 1/4 of total system memory;
assuming this is a dedicated database server.

QUERY CACHE
Query cache is enabled
Current query_cache_size = 128 M
Current query_cache_used = 47 M
Current query_cache_limit = 1 M
Current Query cache Memory fill ratio = 36.89 %
Current query_cache_min_res_unit = 4 K
Query Cache is 23 % fragmented
Run "FLUSH QUERY CACHE" periodically to defragment the query cache memory
If you have many small queries lower 'query_cache_min_res_unit' to reduce fragmentation.
MySQL won't cache query results that are larger than query_cache_limit in size

SORT OPERATIONS
Current sort_buffer_size = 2 M
Current record/read_rnd_buffer_size = 256 K
Sort buffer seems to be fine

JOINS
Current join_buffer_size = 1.00 M
You have had 87 queries where a join could not use an index properly
You should enable "log-queries-not-using-indexes"
Then look for non indexed joins in the slow query log.
If you are unable to optimize your queries you may want to increase your
join_buffer_size to accommodate larger joins in one pass.

Note! This script will still suggest raising the join_buffer_size when
ANY joins not using indexes are found.

OPEN FILES LIMIT
Current open_files_limit = 4110 files
The open_files_limit should typically be set to at least 2x-3x
that of table_cache if you have heavy MyISAM usage.
Your open_files_limit value seems to be fine

TABLE CACHE
Current table_cache value = 1800 tables
You have a total of 337 tables
You have 520 open tables.
The table_cache value seems to be fine

TEMP TABLES
Current max_heap_table_size = 16 M
Current tmp_table_size = 64 M
Of 215864 temp tables, 3% were created on disk
Effective in-memory tmp_table_size is limited to max_heap_table_size.
Created disk tmp tables ratio seems fine

TABLE SCANS
Current read_buffer_size = 1020 K
Current table scan ratio = 1499 : 1
read_buffer_size seems to be fine

TABLE LOCKING
Current Lock Wait ratio = 1 : 101
You may benefit from selective use of InnoDB.
If you have long running SELECT's against MyISAM tables and perform
frequent updates consider setting 'low_priority_updates=1'

PHP:
[mysqld]
old-passwords = 1
safe-show-database
max_connections = 500
key_buffer = 16M
myisam_sort_buffer_size = 64M
join_buffer_size = 1M
read_buffer_size = 1M
sort_buffer_size = 2M
table_cache = 1800
thread_cache_size = 384
wait_timeout = 180
connect_timeout = 10
tmp_table_size = 64M
max_allowed_packet = 64M
max_connect_errors = 10
query_cache_limit = 1M
query_cache_size = 128M
query_cache_type = 1
query_prealloc_size = 16384
query_alloc_block_size = 16384
[mysqld_safe]
open_files_limit = 8192
[mysqldump]
quick
max_allowed_packet = 16M
[myisamchk]
key_buffer = 64M
sort_buffer = 64M
read_buffer = 16M
write_buffer = 16M


PHP:
Server Özellikleri
Dual Xeon 3.0D GHz
4 GB RAM
PHP 5.2.5
Apache v1.3.39
MySQL Sürümü  	4.1.22-standard

Sanırım uptime vakti doldu. Bu değerlere uygun bir yapılandırma yazarsanız sevinirim. Load 4 - 6 arası dolanıyor. xcache kurmak istiyorum ama serverda zend var. Zendi kaldırıp xcache kurunca mesaj gönderiminde hata oluşuyor. Boş bir sayfa çıkıyor karşıma. Error yada bekleme yok. Bu yüzden Loadı düşüremedim.

mysqld altındaki var olan ayarları bu şekilde değiştirin, ayar yoksa ekleyin.

key_buffer = 256M
query_cache_size = 64M
low_priority_updates = 1
 

Shdwt

0
İyinet Üyesi
Katılım
25 Ocak 2008
Mesajlar
20
Reaction score
0
mysqld altındaki var olan ayarları bu şekilde değiştirin, ayar yoksa ekleyin.

key_buffer = 256M
query_cache_size = 64M
low_priority_updates = 1

Dediğiniz gibi değiştirdim. Ama birşey dikkaitimi çekti benm my.cnf de bir sürü ayar var. Bu normalmi. Aralarında loadı yükseltebilecek değer olabilirmi.
 

Mack

0
İyinet Üyesi
Onaylı Üye
Katılım
17 Eylül 2005
Mesajlar
302
Reaction score
0
Konum
AntaLya
PHP:
        -- MYSQL PERFORMANCE TUNING PRIMER --
             - By: Matthew Montgomery -

MySQL Version 4.1.22-standard x86_64

Uptime = 3 days 5 hrs 8 min 32 sec
Avg. qps = 0
Total Questions = 8
Threads Connected = 1

Warning: Server has not been running for at least 48hrs.
It may not be safe to use these recommendations

To find out more information on how each of these
runtime variables effects performance visit:
http://dev.mysql.com/doc/refman/4.1/en/server-system-variables.html
Visit http://www.mysql.com/products/enterprise/advisors.html
for info about MySQL's Enterprise Monitoring and Advisory Service

SLOW QUERIES
Current long_query_time = 10 sec.
You have 0 out of 20 that take longer than 10 sec. to complete
The slow query log is NOT enabled.
Your long_query_time may be too high, I typically set this under 5 sec.

WORKER THREADS
Current thread_cache_size = 0
Current threads_cached = 0
Current threads_per_sec = 1
Historic threads_per_sec = 0
Your thread_cache_size is fine

MAX CONNECTIONS
Current max_connections = 500
Current threads_connected = 1
Historic max_used_connections = 1
The number of used connections is 0% of the configured maximum.
You are using less than 10% of your configured max_connections.
Lowering max_connections could help to avoid an over-allocation of memory
See "MEMORY USAGE" section to make sure you are not over-allocating

MEMORY USAGE
Max Memory Ever Allocated : 20 M
Configured Max Per-thread Buffers : 1 G
Configured Max Global Buffers : 17 M
Configured Max Memory Limit : 1 G
Physical Memory : 11.76 G
Max memory limit seem to be within acceptable norms

KEY BUFFER
Current MyISAM index space = 564 M
Current key_buffer_size = 7 M
Key cache miss rate is 1 : 2
Key buffer fill ratio = 0 %
Your key_buffer_size seems to be too high.
Perhaps you can use these resources elsewhere

QUERY CACHE
Query cache is supported but not enabled
Perhaps you should set the query_cache_size

SORT OPERATIONS
Current sort_buffer_size = 2 M
Current record/read_rnd_buffer_size = 256 K
No sort operations have been performed
Sort buffer seems to be fine

JOINS
Current join_buffer_size = 132.00 K
You have had 0 queries where a join could not use an index properly
Your joins seem to be using indexes properly

OPEN FILES LIMIT
Current open_files_limit = 10000 files
The open_files_limit should typically be set to at least 2x-3x
that of table_cache if you have heavy MyISAM usage.
Your open_files_limit value seems to be fine

TABLE CACHE
Current table_cache value = 64 tables
You have a total of 1409 tables
You have 5 open tables.
The table_cache value seems to be fine

TEMP TABLES
Current max_heap_table_size = 16 M
Current tmp_table_size = 32 M
Of 0 temp tables, 0% were created on disk
Effective in-memory tmp_table_size is limited to max_heap_table_size.
Created disk tmp tables ratio seems fine

TABLE SCANS
Current read_buffer_size = 128 K
Current table scan ratio = 15 : 1
read_buffer_size seems to be fine

TABLE LOCKING
Current Lock Wait ratio = 0 : 128
Your table locking seems to be fine

my.cnf dosyası

Kod:
[mysqld]
set-variable = max_connections=500
safe-show-database

sunucu özellikleri

Kod:
Processor Information

Processor #1 Vendor: GenuineIntel
Processor #1 Name: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
Processor #1 speed: 600.037 MHz
Processor #1 cache size: 4096 KB

Processor #2 Vendor: GenuineIntel
Processor #2 Name: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
Processor #2 speed: 600.037 MHz
Processor #2 cache size: 4096 KB

Processor #3 Vendor: GenuineIntel
Processor #3 Name: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
Processor #3 speed: 600.037 MHz
Processor #3 cache size: 4096 KB

Processor #4 Vendor: GenuineIntel
Processor #4 Name: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
Processor #4 speed: 600.037 MHz
Processor #4 cache size: 4096 KB


512 MB  RAM

yardımlarını bekliyorum iyinet.
 

Türkiye’nin ilk webmaster forum sitesi iyinet.com'da forum üyeleri tarafından yapılan tüm paylaşımlardan; Türk Ceza Kanunu’nun 20. Maddesinin, 5651 Sayılı Kanununun 4. maddesinin 2. fıkrasına göre, paylaşım yapan üyeler sorumludur.

Backlink ve Tanıtım Yazısı için iletişime geçmek için Skype Adresimiz: .cid.1580508955483fe5

Üst